BDS 2012-2018 JEEP WRANGLER JK 2 DOOR 4" LIFT KIT,FOX 2.0 SHOCKS
BRAND NEW BDS SUSPENSION 4 INCH LIFT KIT WITH FRONT & REAR FOX 2.0 PERFORMANCE SERIES SHOCKS, COMPATIBLE WITH 2012-2018 JEEP WRANGLER JK 2 DOOR
TAKE YOUR 2012-2018 JEEP WRANGLER JK 2 DOOR TO THE NEXT LEVEL AND IMPROVE THE RIDE WITH THIS 4-INCH LIFT KIT FROM BDS SUSPENSION. DESIGNED TO IMPROVE STANCE THIS KIT INCLUDES EVERYTHING NECESSARY TO SET YOUR TRUCK UP RIGHT WITH CLEARANCE FOR UP TO 37" TIRES.
UP FRONT THE LIFT KIT INCLUDES 4" PRO-RIDE COIL SPRINGS CAPABLE OF FULL COIL BIND AND 3" BUMP STOP EXTENSIONS TO CONTROL THE COMPRESSION TRAVEL, BUT INCREASE WHEEL TRAVEL. ALSO INCLUDED ARE BRAKE LINE BRACKETS, SWAY BAR LINKS, AND FRONT TRACK BAR RELOCATION BRACKET AND PITMAN ARM TO IMPROVE THE STEERING AND HANDLING GEOMETRY. THE FRONT SUSPENSION IN THIS 4-INCH LIFT KIT IS FINISHED OFF WITH FIXED LENGTH LOWER CONTROL ARMS WITH OE GRADE RUBBER BUSHINGS THAT RE-POSITION THE FRONT AXLE FOR PROPER ALIGNMENT.
IN THE REAR THE KIT UTILIZES PRO-RIDE COIL SPRINGS, SWAY BAR DROP BRACKETS, AND A REAR FRAME MOUNTED TRACK BAR RELOCATION BRACKET TO CORRECT AXLE SHIFT. FOR PROPER REAR AXLE POSITION AND PINION ANGLE THIS KIT INCLUDES FIXED LENGTH REAR LOWER CONTROL ARMS AND ADJUSTABLE REAR UPPER ARMS. ROUND OUT THIS 4" LIFT KIT WITH YOUR CHOICE OF SPECIALLY TUNED NX2 NITRO SERIES GAS SHOCKS OR FOX 2.0 IFP PERFORMANCE SERIES GAS SHOCKS TO OFFER IMPROVED DAMPER PERFORMANCE.
NOTE: WILL NOT FIT 2WD MODELS
NOTE: THE FIXED FRONT AND REAR LOWER CONTROL ARMS CAN BE UPGRADED TO THE FLEX OR ADJUSTABLE ARMS LISTED IN THE ACCESSORIES
NOTE: THE FRONT DRIVESHAFT IS MAXED OUT AT FULL DROOP AND ON CERTAIN MODELS, THE DRIVESHAFT BOOT CAN CONTACT THE TRANSMISSION PAN. REPLACEMENT OF THE FRONT DRIVESHAFT IS RECOMMENDED
NOTE: ЕXHAUST MODIFICATION MAY BE REQUIRED
COMPATIBLE WITH:
JEEP:
2012-2018 WRANGLER JK 2 DOOR
FOX 2.0 PERFORMANCE SERIES:
2-INCH IMPACT EXTRUDED ALUMINUM BODY
INTERNAL FLOATING PISTON (IFP) MONOTUBE DESIGN
CNC MACHINED 6061-T6 ALUMINUM MOUNTING ENDS
LARGE 5/8-INCH HARD CHROME PLATED HEAT-TREATED ALLOY STEEL SHAFT
RACE-DEVELOPED HIGH-FLOW PISTON DESIGN
APPLICATION-SPECIFIC VALVING TO MAXIMIZE PERFORMANCE
LONG-LASTING CLEAR ANODIZED FINISH
PRO-RIDE COIL SPRINGS:
A PAIR OF FULL-LENGTH, GAS-SPECIFIC, PROGRESSIVE RATE PRO-RIDE COIL SPRINGS ARE SUPPLIED TO PROVIDE THE CORRECT LIFT HEIGHT AND SMOOTH, PREDICTABLE RIDE ACROSS VARIOUS TERRAINS. MANUFACTURED FROM HIGH TENSILE STEEL, OUR DIRECT OE REPLACEMENT COIL SPRINGS ARE ENGINEERED WITH PROPERLY SIZED WIRE DIAMETER. THIS RESULTS IN MAXIMUM RELIABILITY WITHOUT PREMATURE COIL BIND.
STEERING CORRECTION:
TO OPTIMIZE STEERING GEOMETRY ONCE LIFTED, A FORGED DROP PITMAN ARM IS USED TO MINIMIZE THE STEERING ANGLE AND PAIR IT WITH A HEAVY DUTY TRACK BAR DROP BRACKET TO KEEP THEM IN PHASE THROUGH SUSPENSION TRAVEL WHILE RECENTERING THE FRONT AXLE.
FEATURES:
PRORIDE COIL SPRINGS OFFER IMPROVED RIDE QUALITY AND MORE ARTICULATION
SWAY BAR QUICKER DISCONNECTS AND EXTENDED REAR LINK FOR IMPROVED OFF-ROAD FLEX
NEW CONTROL ARMS TO PROPERLY CONTROL THE FRONT AND REAR AXLE POSITIONS
REAR TRACK BAR BRACKET REPOSITIONS REAR AXLE UNDER VEHICLE
ALLOWS CLEARANCE FOR 37" TIRES
SPECS:
FRONT LIFT METHOD: COIL SPRINGS
REAR LIFT METHOD: COIL SPRINGS
SHOCKS INCLUDED: YES
FRONT LIFT HEIGHT: 4"
REAR LIFT HEIGHT: 4"
YOU CAN VIEW AND DOWNLOAD THE COMPLETE ASSEMBLY INSTRUCTION BOOKLETS FOR THIS LIFT KIT HERE.
