SEARCH

BRAND NEW ZONE OFFROAD 4" COIL SPRING LIFT KIT WITH FRONT & REAR FOX 2.0 ADVENTURE SERIES IFP SHOCKS, COMPATIBLE WITH 1999-2004 JEEP GRAND CHEROKEE WJ 4WD

WANT THE PERFECT COMBINATION OF LOOKS, GROUND CLEARANCE AND WHEEL TRAVEL? THIS 4" SUSPENSION LIFT LETS YOU CLEAR 32" TIRES AND THE CONFIDENCE YOU WANT WHEN YOU VENTURE OFF ROAD WITH YOUR 4WD 1999 - 2004 JEEP GRAND CHEROKEE (WJ).

NOTE: DUE TO THE TEMPERAMENTAL DESIGN OF THE FACTORY STEERING, USE OF AGGRESSIVE, OUT-OF-ROUND TIRES, AND CERTAIN WHEEL/TIRE COMBINATIONS MAY CAUSE STEERING WHEEL SHIMMY. IN MANY CASES THIS IS RESOLVED WITH ALIGNMENT OR TIRE BALANCING.

NOTE: FITMENT: V8 ENGINE EQUIPPED MODELS MAY NOT ACHIEVE STATED LIFT HEIGHT.

NOTE: WHEELS / TIRES: DUE TO THE TEMPERAMENTAL DESIGN OF THE FACTORY STEERING USE OF AGGRESSIVE, OUT-OF-ROUND TIRES, AND CERTAIN WHEEL/TIRE COMBINATIONS MAY CAUSE STEERING WHEEL SHIMMY. IN MANY CASES THIS IS RESOLVED WITH ALIGNMENT OR TIRE BALANCING.

COMPATIBLE WITH:

• JEEP:
• 1999-2004 GRAND CHEROKEE WJ 4WD

FOX 2.0 ADVENTURE SERIES SHOCKS FEATURES:

• BODY PLATING: THICK SILVER POWDER COAT
• BODY: 2.0 SMOOTH BORE AND HONED SEAMLESS ALLOY BODIES
• BUSHINGS: QUIET NITRILE RUBBER ALLOWS FOR INCREASED SUSPENSION ARTICULATION
• INTERNAL RESERVOIR: INTERNAL IFP MONO-TUBE RESERVOIR DESIGN SEPARATES SHOCK OIL FROM THE HIGH-PRESSURE NITROGEN
• MOUNTING: DIRECT REPLACEMENT FOR STOCK AND AFTERMARKET LIFTS KITS
• OIL: JM92 ADVANCED SUSPENSION FLUID FOR IMPROVED PERFORMANCE AT VARIABLE TEMPERATURES
• SHAFT: 5/8" HARD CHROME PLATED HEAT-TREATED ALLOY STEEL

FEATURES:

• BUMP STOP EXTENSIONS PROPERLY LIMIT UP-TRAVEL, PROTECTING YOUR VEHICLE
• FULL LENGTH REPLACEMENT COIL SPRINGS ADD ADDITIONAL RIDE HEIGHT WHILE MAINTAINING RIDE QUALITY
• HEAVY-DUTY LOWER CONTROL ARMS IMPROVE STRENGTH AND ARTICULATION WHILE CORRECTING CASTER
• HEAVY-DUTY, ADJUSTABLE FRONT TRACK BAR RE-CENTERS FRONT AXLE AND ADDS STRENGTH
• HEAVY-DUTY, EXTENDED-LENGTH SWAY BAR LINKS IMPROVE OPERATING ANGLE FOR REDUCED BODY ROLL
• REAR UPPER TRI-LINK RELOCATION INCLUDED TO CORRECT REAR SUSPENSION GEOMETRY
• TRANSFER CASE DROP KIT INCLUDED TO CORRECT REAR DRIVELINE ANGLE AND ALLOW USE OF FACTORY REAR DRIVESHAFT

SPECS:

• FRONT LIFT HEIGHT: 4"
• REAR LIFT HEIGHT: 3.5"
• FRONT LIFT METHOD: COIL SPRINGS
• REAR LIFT METHOD: COIL SPRINGS
• LIFT TYPE: LIFT KIT
• WHEEL SIZE: 16 X 8
• BACK SPACING: 6"
• MAX TIRE SIZE: 31 X 10.5
• WHEEL SIZE: 17 X 9
• BACK SPACING: 6"
• MAX TIRE SIZE: 31 X 10.5
• WHEEL SIZE: 18 X 9
• BACK SPACING: 6"
• MAX TIRE SIZE: 31 X 10.5
• IS ADJUSTABLE: NO
• CUTTING REQUIRED: NO
• ACCOMMODATES FACTORY WHEELS: YES
• WELDING REQUIRED: NO