ROLLER BEARING COILOVER ELIMINATOR COILOVER ELIMINATOR,W/BEARING & SEAL
LONG DESIGN
COMPRESSION=16"
EXTENSION=24 1/2"
ACCEPTS 7" TO 16" SPRINGS
LIGHTWEIGHT STEEL
DUAL SEAL DESIGN WITH INTERNAL STOP
NOTE: TO GREASE, REMOVE SCREW ON BODY & FILL THROUGH GREASE FITTING UNTIL GREASE COMES OUT HOLE, THEN REPLACE SCREW
MAINTENANCE INSTRUCTIONS: THIS UNIT HAS SOME CLOSE TOLERANCE PARTS AND NEEDS TO BE DISASSEMBLED, CLEANED THROUGHOUT, INSPECTED, AND REASSEMBLED EVERY 4 TO 6 RACE NIGHTS (DEPENDING ON CONDITIONS). ASSEMBLE WITH ANTI-SEIZE ON THE PISTON AND LIGHT OIL ON ROD. REMOVE BOLT AND WASHER FROM MAIN BODY AND FILL WITH GREASE USING GREASE FITTING UNTIL GREASE COMES OUT BOLT HOLE. REPLACE BOLT AND WASHER AND REINSTALL.
