WILL ACCEPT UP TO 3.750" STROKE CRANKSHAFTS WITH NO ADDITIONAL WORK & WILL ACCEPT 3.875" STROKE CRANKSHAFTS WITH A SMALL AMOUNT OF GRINDING
STANDARD, 4.125" BORE MAKES: *372" WITH 3.480" STROKE CRANKSHAFT *381" WITH 3.562" STROKE CRANKSHAFT *400" WITH 3.750" STROKE CRANKSHAFT *414" WITH 3.875" STROKE CRANKSHAFT *427" WITH 4.000" STROKE CRANKSHAFT
CAN BE BORED UP TO .060" OVER (4.185")
WHEN BORED TO .020" OVER (4.145"), IT MAKES: *376" WITH 3.480" STROKE CRANKSHAFT *385" WITH 3.562" STROKE CRANKSHAFT *405" WITH 3.750" STROKE CRANKSHAFT *418" WITH 3.875" STROKE CRANKSHAFT *432" WITH 4.000" STROKE CRANKSHAFT
WHEN BORED TO .030" OVER (4.155"), IT MAKES: *377" WITH 3.480" STROKE CRANKSHAFT *386" WITH 3.562" STROKE CRANKSHAFT *406" WITH 3.750" STROKE CRANKSHAFT *420" WITH 3.875" STROKE CRANKSHAFT *434" WITH 4.000" STROKE CRANKSHAFT
WHEN BORED TO .040" OVER (4.145"), IT MAKES: *379" WITH 3.480" STROKE CRANKSHAFT *388" WITH 3.562" STROKE CRANKSHAFT *409" WITH 3.750" STROKE CRANKSHAFT *422" WITH 3.875" STROKE CRANKSHAFT *436" WITH 4.000" STROKE CRANKSHAFT
WHEN BORED TO .060" OVER (4.185"), IT MAKES: *383" WITH 3.480" STROKE CRANKSHAFT *392" WITH 3.562" STROKE CRANKSHAFT *413" WITH 3.750" STROKE CRANKSHAFT *427" WITH 3.875" STROKE CRANKSHAFT *440" WITH 4.000" STROKE CRANKSHAFT
WEIGHS APPROXIMATELY 198 LBS.
CAM BEARING BORE: 2.00" ID
SUGGESTED CAM BEARINGS: DURABOND DT-1-1T
CAM BEARING PRESS: .002"
CAM JOURNAL: 1.869" O.D.
CAM PLUG: 2.375" DIAMETER CUP PLUG
CYLINDER WALL THICKNESS: .250" + AT 4.185"
DECK HEIGHT: 9.025"
DECK THICKNESS: .625+"
FUEL PUMP: MECHANICAL PUMP BOSS INCLUDED
FUEL PUMP PUSHROD LENGTH: STANDARD
FREEZE PLUGS: PRESS-IN CUP STYLE
LIFTER BORES: .842" - .843"
MAIN BEARING BORE: 2.641"
MAIN BEARING SIZE: 2.450" (350)
MAIN CAP PRESS: .004" - .006"
MAIN CAPS: STEEL 4 BOLT (5)
MAIN CAP BOLTS: SPLAYED 8740
MAIN CAP REGISTER: STEPPED, NO DOWELS
OIL SYSTEM: WET SUMP - PRIORITY MAIN OILING
OIL PUMP SHAFT: .481" O.D. (STANDARD SBC 350)
OIL PAN: STANDARD SBC
REAR MAIN SEAL: STANDARD 2 PIECE SBC
STARTER: STANDARD SBC
STUD HOLES: BLIND HEAD STUD HOLES
TIMING CHAIN/GEARS: STANDARD SBC
TIMING COVER: STANDARD SBC
TORQUE SPECS: 7/16" BOLTS - 65 FT. LBS. 3/8" BOLTS - 35 FT. LBS.
